Rack
Centrifuge tube rack 50ml (36 place)
• Epoxy coated steel wire
• Chemical resistant
• Corrosion resistant
• Autoclavable
• 30mm square well
• Size: 229 x 229 x 89mm
…
Cuvette rack, PP, size 117 x 108 x 111mm
• Made of polypropylene (PP)
• Steam sterilizable at 121? C
• Racks hold cells with minimal physical contact and virtually eliminates…
Heavy duty test tube rack 13-16mm (50 place) (White)
• Steam autoclavable at 121°C
• Made of polypropylene
• Lettered and numbered wells
• End plates have hand grips for transport
•…
Heavy duty test tube rack 16-20mm (32 place) (white)
• Steam autoclavable at 121°C
• Made of polypropylene
• Lettered and numbered wells
• End plates have hand grips for transport
•…
In-Line Test tube rack for 20-25mm tubes (6 place) (White)
• For high-visibility, this HDPE rack is end-supported by 2 columns • Top plate has 25mm diameter holes; base has…
Lab-Aire® II Benchtop Drying Racks, 19 pegs
• Benchtop/Wall-mount
• Single-sided, 1-tier
• Fits against a wall, conserving bench space
• Holds: 19 Pegs
…
Lab-Aire® II Electric Benchtop Dryer, 19 pegs
• Dries labware quickly by providing continous warm air circulation
• Selector knob allows choice of 3 temperature settings: high, medium,…
Microscope slide box for 100 slides
• PS material
• With lid
• For 100 slides of 76 x 26mm
• Stackable, break-proof and easy to clean
• Seats are…
Microscope slide box for 50 slides
• PS material
• With lid
• For 50 slides of 76 x 26mm
• Stackable, break-proof and easy to clean
• Seats are…
Nessler tube rack 100ml (6 place)
• Made of polypropylene
• Chemical and corrosion resistant
• Can be steam autoclaved at 121°C
• Dimensions: 30cm x 9.5cm x 14cm
•…
Nessler tube rack 50ml (6 place)
• Made of polypropylene
• Chemical and corrosion resistant
• Can be steam autoclaved at 121°C
• Dimensions: 30cm x 9.5cm x 14cm
•…
ONERACK DELRIN Test tube rack 16mm (72 place) (White) (Contact us for price)
• Extra tough to resist most acids, solvents and heat • Molded in a single, continuous piece - no assembly…
ONERACK PP Test tube rack 16mm (72 place) (White) (Contact us for price)
• Molded in a single, continuous piece - no assembly required and no detachable pieces • Made of polypropylene (PP)…
Pipette stand, PP (44 place)
• Accepts 44 pipettes of up to 15mm OD • White color • Very stable • Support unit rotates…
Pipette support rack, vertical (50 place)
• Top and middle tiers have 16mm dia holes • Bottom tier holes taper from 16mm to 6mm • PP…
Pipette support stand, vertical (28 place)
• Steam autoclavable at 121 deg C • Size: 178mm x 178mm high • Space-saving vertical pipette storage for 28…
Poxygrid wire test tube rack, 15-16mm (48 place) (Green)
• Every rack comes with square holes, with three decks, a slotted grid bottom and reinforced edges for extra strength
•…
Poxygrid wire test tube rack, 18-20mm (40 place) (Blue)
• Every rack comes with square holes, with three decks, a slotted grid bottom and reinforced edges for extra strength
•…
Poxygrid wire test tube rack, 25-30mm (24 place) (Orange)
• Every rack comes with square holes, with three decks, a slotted grid bottom and reinforced edges for extra strength…
Rotary pipette rack, PP, dia 230mm
• Consists of a baseplate and vertical rod accommodating a rotary unit composed of two end-plates and a spacer-tube
• Upper…
Round bottom flask support, PP
• For round bottom flasks, enhancing laboratory safety
• White
• Durable for temperatures up to 121 °C
• Dia 160mm
…
Test tube basket, size 6 x 6 x 6"
• Made of polypropylene (PP)
• Steam autoclavable at 121°C
• Perfect for dipping, transport, and storage of test tubes
• Baskets available…
Test tube rack 26-30mm (24 place) (White)
• Made of polypropylene
• Steam autoclavable at 121°C
• Wells are numbered and lettered for identification
• Interlocking end plates for safe…
Test tube rack for 10-13mm tubes (90 place) (Blue)
• Made of autoclavable polypropylene • Will sink in a water bath and maintain their stability even in agitated water…
Test tube rack for 13mm tubes (90 place) (White)
• Molded of autoclavable polypropylene
• Autoclavable at 121°C
• Can sink in a water bath and remain stable even in agitated…
Test tube rack for 16mm tubes (60 place) (White)
• Molded of autoclavable polypropylene
• Autoclavable at 121°C
• Can sink in a water bath and remain stable even…
Test tube rack for 20mm tubes (40 place) (White)
• Molded of autoclavable polypropylene
• Autoclavable at 121°C
• Can sink in a water bath and remain stable even in agitated…
Test tube rack for 21mm tubes (12 place) (White)
• 3 tier • Working temperatures of -20 to +90°C • Autoclavable at 121°C • 190 (L) x 60 (W)…
Test tube rack for 21mm tubes (24 place) (White)
• 3 tier • Working temperatures of -20 to +90 deg C • Autoclavable at 121 deg C • 375…
Test tube rack for 25mm tubes (24 place) (White)
• Molded of autoclavable polypropylene
• Autoclavable at 121°C
• Can sink in a water bath and remain stable even…
Test tube rack for 30mm tubes (21 place) (White)
• Molded of autoclavable polypropylene
• Autoclavable at 121°C
• Can sink in a water bath and remain stable even in agitated…
Thermometer rack, PP (25 place)
• Hole diameter in the top and middle tiers: 7.9mm • Distance between top and bottom plates: 105mm • Chemical…
